Second A/c unit?

6cuda6

Active member
Oct 3, 2019
478
127
43
53
Ontario, Canada
So im thinking of adding a second A/C unit this spring.....anyone have pictures of were the wiring is on their gutted units? (Both ends would be helpful).

Im trying to determine if my Hughes is even wired for it.
 

cdamen

New member
Oct 4, 2019
10
1
1
72
I purchased a "piggyback" 20 amp from lowes the mfg of the breaker is Eaton. The #10 wire runs up from the panel . then remove the center ceiling panel to provide access for the wire to the new a/c.. Check to make sure the a/c's are not on the same leg.
 

6cuda6

Active member
Oct 3, 2019
478
127
43
53
Ontario, Canada
I purchased a "piggyback" 20 amp from lowes the mfg of the breaker is Eaton. The #10 wire runs up from the panel . then remove the center ceiling panel to provide access for the wire to the new a/c.. Check to make sure the a/c's are not on the same leg.
Thanks for the info!