FINALLY got heated space to work :-)

JodyPackerfan

Member
Feb 2, 2020
42
5
8
Racine, Wisconsin
This is my 1976 Elleganza II - Starting from the top down. Plan to totally strip & restart roof. New fans, vents, seals, drip rails - everything. The drip rails are really something, tedious does not really describe this well. Only had two screws give me trouble. grinded heads off removed rail vicegrip, and paciently wiggled back & forth - litterally did this for 10-15 min's each. Do you guys have any chemical or other suggestions for cleaning/stripping the crud? I also included a few pic's of removing stripping. Sorry to the purists but I never cared for them. Warmed up the panel with infrared lights Not too hot or chemicals flash off too fast) then sprayed Goof Off graffiti remover lightly on the surface and flooded a scotch pad 320 grit (Could have used a much less aggressive grit) Came right off - panel buff out nicely
 

Attachments

Mike Perez

Administrator
Staff member
Oct 2, 2019
328
51
28
Looks good. I wish I could move mine to Indoor storage. If I did that, I'd have to move all my tools too. It may be worth it.
 
  • Like
Reactions: JodyPackerfan

tmsnyder

Member
Oct 7, 2019
99
18
8
Why did you put tubing in the floor if you are in Mexico ? LOL Does it dip down into the 40s sometimes :)

Beautiful setup!

No need to apologize, reminds me of a joke about a guy that goes to a Priest to confess fooling around with a married woman, going into great detail about all their exploits. The Priest forgives him and orders him to do 5 Hail Mary's and so and so, the guy says 'oh, but I'm not Catholic'. The Priest says 'then why did you tell me all that ?' and the guy says 'I'm telling everyone!' I'd show off your garage too if I had it!

Yeah... sorry... to make matters worse, we are in Mexico to escape the snow and cold. Its nice and warm in the shop... well 12C and I'm not even working on the coach
 

RF_Burns

Member
Oct 3, 2019
32
10
8
Ontario Canada
To clarify, we are from the Great White North, so The Murray is in its nice heated shop. But we are in Mexico for the winter to escape the cold! So I'm not even taking advantage of the shop to work on The Murray. I gave Paula some space to refinish some furniture. She expropriated the rest of the shop. so now my Man Cave has become a She-Shed. :sick:

There is a dog in the pic below trying to find his way out!

from BB-Key Feb 2020 624.jpg
 

JodyPackerfan

Member
Feb 2, 2020
42
5
8
Racine, Wisconsin
To clarify, we are from the Great White North, so The Murray is in its nice heated shop. But we are in Mexico for the winter to escape the cold! So I'm not even taking advantage of the shop to work on The Murray. I gave Paula some space to refinish some furniture. She expropriated the rest of the shop. so now my Man Cave has become a She-Shed. :sick:

There is a dog in the pic below trying to find his way out!

View attachment 2248
BUMMER - -you have to get that under control ASAP :)
 

Mike_H

Member
Oct 3, 2019
96
8
8
42
Grand Rapids, MI
mikehiler.wixsite.com
To clarify, we are from the Great White North, so The Murray is in its nice heated shop. But we are in Mexico for the winter to escape the cold! So I'm not even taking advantage of the shop to work on The Murray. I gave Paula some space to refinish some furniture. She expropriated the rest of the shop. so now my Man Cave has become a She-Shed. :sick:

There is a dog in the pic below trying to find his way out!

View attachment 2248
Wow. My wife an I have a similar arrangement. 24 x 30 heated barn, with an attic. The deal was that the boat (which has been replaced with a jeep) is stored indoors and we would both have workshop space. However, her furniture took over the whole attic, which pushed my stuff to the main level and now we don't both have room for projects, we have to schedule time.
 
  • Like
Reactions: JodyPackerfan

JodyPackerfan

Member
Feb 2, 2020
42
5
8
Racine, Wisconsin
Bad installation at the factory - the sealant pushed up the panels in many places that were actually keeping the drip rail to fit in the slot - in many places factory sealant was in the actual track - these spots where never seated properly from new - had to dig a lot of crud from behind panels so I could tuck them back in where they where supposed to be - only had to drill & tap one screwIMG_8324.JPGIMG_8333.JPGIMG_8325.JPGIMG_8328.JPGIMG_8332.JPGIMG_8336.JPGIMG_8339.JPG
 
Last edited:

JodyPackerfan

Member
Feb 2, 2020
42
5
8
Racine, Wisconsin
Thank You - Yah the engineering was exceptional but most GM products in the 70's where not assembled very well. The fit and finish of that decade at GM is notorious for being bad. I guess we have to expect that of our 70's rig :)